Introduction Compact and reduce the area required for chip storage. This compactor can reduce chip storage area from up to 5:1 on grinding swarf and up to 20:1 on machining chips.

Features Prevent EPA problems Increase selling price of chips Improved housekeeping Reduced area requirement for chip storage Reduce safety hazard Reclaim cutting fluid

Selecting The Proper Model Model Diameter of Compacted Cutting Chips Aluminum Mild Steel Cast Iron Die Cast Copper Stainless Steel Chips Curled Chips Curled Chips Curled Chips Curled Chips Curled Chips Curled CCP-100H3 ø3.15"     R R R R R a     a   CCP-100H4 ø4" R a R R         R a a   R = Recommended        a = Acceptable.

Specifications Item CCP-100H/3 CCP-100H/4 Application Cast Iron, Copper, Bronze, Stainless Aluminum, Mild Steels Suitable Chips For Compacting Call for evaluation of your application and demo Press Force 110 tons 110 tons Size of Compacted Part 3.5" x L 4" x L Compaction Pressure 28,304 psi at 3.15" Dia. 17,552 psi at 4" Dia. Hopper Capacity (gal) 26.4 1 Cycle Time (sec) 30 (approx) 19 (approx) Hydraulic Motor 7.3 HP Auger Motors Vertical 1 HP    Horizontal 1/2 HP Power Requirement 220 volts 60 Hz 3 Phase 60 amp service Amp Draw 38 Amps Machine Size (inch) 37.4(W) x 85(L) x 61.4(H) Machine Weight (lbs) 4,133 4,133 L = Length of compacted part will depend on setting of timer, type and size of chips. Specifications subject to change without notice.

© 2008 Amada Cutting Technologies, Inc. All rights reserved.