Home Machines Blades Parts Support PDF Catalog Videos About Us
LYBRA C450
Amada High Speed CNC Circular Saw Machine

Click to Enlarge
Productivity Features
Miter Cutting
  • Multy tube cutting facility.
    Miter cut +/- 45 degrees of 2 off vertically stacked tubes.
    Special acute miter cut at 15 degrees.
Automatic Revolving Table
  • Up to +/- 60 dgrees driven by a servomotor.
Auto feeder driven by ball-screw and servomotor
Automatic Weld Seam Detection System for Round Tubes
Motorised Rolls Group and Automatic Stop for Cycle with or without bar's Trim Cut
Specifications
Capacity

Cutting Capacity
(at 90)

 Round Tube (Diameter)0.39" - 5.70" 10 - 145 mm
Square Tube0.47" x 0.47" - 5.11" x 5.11"12 x 12 mm - 130 x 130mm
Rectangle Tube (W x H) 0.78" x 0.39" - 7.08" x 3.93" 20 x 10 mm - 180 x 100 mm

Cutting Capacity
(at 45)

 Round Tube (Diameter)0.39" - 5.31"10 - 135 mm
Square Tube0.47" x 0.47" - 4.33" x 4.33"12 x 12 mm - 110 x 110 mm
Rectangle Tube (W x H) 0.78" x 0.39" - 5.90" x 2.75" 20 x 10 mm - 150 x 70 mm

Stock Table Loading Capacity
Round bars (Length x Diameter)

137.80" - 244.09"
Or 6614 lbs. (*1)

3500 - 6200 mm
Or 2976 kg (*1)
Incline Table Dimensions (Length x Width) 275" x 93.5" 6984 x 2374 mm

Auto unloading device
Material Feed Feed Length Max 118.11" (*2) Max 3000 mm (*2)
Feed Drive Belt Conveyor Type

Blade and Saw Head
Saw Blade OD x Bore x T 12.4" - 17.7" x 1.57" 315 - 450 x 40 mm
Blade Speed 30 - 120 m/min, Inverter
Saw Head Feed Drive Hydraulic cylinder
Swivel Angle +/- 45

Motors
Motors Saw Blade Motor 7 HP 5.5 kW
Hydraulic Pump Motor 3 HP 2.2 kW
Cutting Fluid Pump Motor 1/6 HP 0.12kW

Power Requirements
Power Requirements Power Supply Voltage

AC220V to 380V±10%, 3PH, 60Hz
(All Other Voltages Require Transformer.)
Power Requirement 28 kVA

Hydraulic
Hydraulic Tank Capacity 9.3 gal 35 Liters

Material Feed
Material Feed Feed Mechanism Shuttle Vise
Material Index AC Servo Motor and Ball Screw
Stroke 78.74" 2000 mm
Feed Length 0.79" - 118.11" (*2) 20 - 3000 mm (*2)
Remnant Length 0.79" 20 mm

Dimensions and Weight
Machine Dimensions (W x L x H (*3)) 63.0" x 196.85" x 74.8" 1600 x 5000 x 1900 mm
Machine Weight (*3) 6888 lbs. 3100 kg.
*1: Evenly Distributed Over Entire Table.
*2: Feed Length may change depending on the unloading unit specification.
*3: Not included loading unit and unloading unit.
Machine Standard Features
  • Auto Cutting Head Positioning
  • Auto Vertical Clamp Positioning
  • Chip Conveyor
  • Cutting Length by CNC
  • Cut Piece Counter
  • Flood Coolant System
  • Mist System for Blade
  • PC Unit by Siemens
  • Self-Diagnostics by Error Codes
  • Sorting Device for Trim and Remnants
  • Table Cleaning Devise
  • Vise Pressure Control Valve

Optional Accessories
  • Belt Collection Area for Parts 16" - 118"
  • Belt Unloading Systems, 118", 177", 236"
  • Bundle Magazine for Material 4" x 24"
  • Chain Magazines, 12 Components, 14 Components
  • Flap Sorter (Front and Rear Ejection), 118", 157"
  • Loading System in Layers to 27' Long
  • Positioning Device for Cutting Rect. Tubes Vertically
  • Unloading Gripper

Specifications may change without notice at the sole discretion of Amada's Engineering Department.

 

© 2009 Amada Cutting Technologies, Inc. All rights reserved.