Home Machines Blades Parts Support PDF Catalog Videos About Us
CM150AN
Amada Metal Cutting Carbide Circular Saw
amada metal cutting carbide circular saw CM150an
Click to Enlarge
Productivity Features
This AMADA Metal Sawing Machine incorporates the latest technologies of carbide circular metal sawing blades with State of the Art machine designs. This combination has proven to give unequaled performances in metal sawing.


  • The CM-150AN utilizes a disposable carbide saw blade for the most economical and efficient metal sawing operation.


  • These features coupled to an inclined magazine for continuous cutting, produce the lowest possibly cost per square inch of metal removal ever achieved.


  • Unsurpassed accuracy and high quality end finishes help to decrease cost by eliminating secondary operations in many instances.


  • Carbide stabilizing pads for the saw blade and a complete enclosure around the machine enable the CM-150AN to produce high production rates while maintaining noise level within the acceptable limits.


  • The mist system and an automatic chip conveyor help to keep an extremely clean machine and adjacent areas.
Specifications
Capacity
Cutting Capacity Round (Diameter)2.8" - 6"70 - 150 mm
Rectangle (W x H)2.8" x 2.8" - 4.3" x 4.3"70 x 70 - 110 x 110 mm

Maximum Stock Table Loading Capacity
Round Bars (Length x Diameter)

19.6 ft x 6"
Or 4410 lbs. (*1)

6000 x 150 mm
Or 2000 kg (*1)
Incline Table Dimensions (Length x Width)

Blade and Saw Head
Saw Blade Blade Speed55 - 80 rpm, by Inverter
Number of Teeth40 or 60
OD x Bore x T18.1" - 1.97" x 0.11"460 x 50 x 2.7 mm
Saw HeadFeed DriveHydraulic Motor and Ball Screw

Motors
Motors Saw Blade Motor15 HP 11 kW
Hydraulic Pump Motor3 HP2.2 kW
Cut-to-Length Feed Motor1/2 HP 500 W

Power Requirements
Power Requirements Power Supply Voltage

AC220V±10%, 3PH, 60Hz
(All Other Voltages Require Transformer.)

Power Requirement29 kVA

Hydraulic
HydraulicTank Capacity26.7 gal100 Liters

Material Index
Material Index Index MechanismShuttle Vise
Material IndexAC Servo Motor and Ball Screw
Stroke0.2" - 23.6"5 - 600 mm
Length

0.2" - 999.999"
(Multiple Indexing)

5 - 9999.99 mm
(Multiple Indexing)

End Trimming Length0.6" - 3.9"15 - 99 mm
Remnant Length2.8" - 2.8" plus Index Length70-70 mm plus Index Length

Dimensions and Weight
Machine Dimensions (W x L x H) 77.8" x 98.8" x 66.9" 1975 x 2510 x 1700 mm
Machine Weight5733 lbs.2600 kg.
*1: Evenly Distributed Over Entire Table.

Floor Plan
Floor Plan (PDF file)

Machine Standard Features
  • Ammeter Monitoring Main Motor Amp Draw
  • Anti Backlash Device
  • Auto Trim Cut
  • Carbide Stabilizer Pads
  • Chip Conveyor
  • Controlled Mist System
  • Cut Piece Counter
  • LED Readout Indicating Feed Rate
  • Length Setting by Direct Readout
  • Incline Table
  • Self-Diagnostics
  • Sorting Device to Separate Trim and Remnants from Good Pieces
  • Speed Change by Inverter
  • Wire Brush

Optional Accessories
  • Mist Collector

Specifications may change without notice at the sole discretion of Amada's Engineering Department.

 

© 2011 Amada Machine Tools America, Inc. All rights reserved.