| Increased Blade Life without Sacrificing Productivity |
|---|
-
By controlling vibrations that occur during the penetration force, pulse cutting reduces cutting
resistance and blade wear in half. Lower tooling cost is ensured by the extended blade life.
|
|
|
| Automatic Dual Wire Brush System |
|---|
-
The dual wire brushes contact the sides of the blade at the teeth, instantly cleaning the gullet area and
avoiding excessive brush wear due to improper settings.
|
|
|
Capacity
| Cutting Capacity |
Round (Diameter) |
28" |
700 mm |
| Rectangle (W x H) |
31.5" x 28" |
800 mm x 700 mm |
| Work Load Capacity |
26400 lbs. |
11880 kg. |
Blade and Vise Operation
| Saw Blade |
Dimensions (L x T x W) |
27'3" x 0.063" x 2-5/8" |
8300 x 1.6 x 67 mm |
| Blade Speed |
49-261 ft./min, Inverter |
15-80 m/min, Inverter |
| Tension Control |
Hydraulic |
| Blade Control |
Top Limit Setting |
Automatic Setting |
| Cutting Control |
CNC with Pulse Control |
| Vise Operation |
Type |
Front and Rear Vise |
| Control |
Hydraulic Full-Stroke Cylinder |
Motors
| Motors |
Saw Blade Motor |
25 HP, Pulse Controlled |
18.9 kW, Pulse Controlled |
| Hydraulic Pump Motor |
5 HP |
3.7 kW |
| Pulse Cutting Motor |
1/4 HP |
0.2 kW |
| Cutting Fluid Pump Motor |
1/2 HP |
0.37 kW |
Power Requirements
| Power Requirements |
Power Supply Voltage |
AC220±10%, 3 PH, 60 Hz
(All Other Voltages Require Transformer)
|
| Power Requirement |
50 kVA |
Cutting Fluid and Hydraulic
| Cutting Fluid |
Tank Capacity |
37 gal. |
140 Liters |
| Pump Type |
Electric |
| Hydraulic |
Tank Capacity |
29.1 gal. |
110 Liters |
| Pressure Setting |
783 psi |
5.5 MPa(55 kgf/cm) |
Chip Disposal
| Chip Disposal |
Chip Conveyor |
Material Index
| Material Index |
Index Mechanism |
Shuttle Vise |
| Stroke |
18.90" |
480 mm |
| Length |
0.984"-787.400" |
25 - 9999.9 mm |
| Number of Input Station |
30 Blocks, 10 Stations per Block |
| Number of Cut Off Pieces |
1-999 |
| Remnant Length |
1.8" |
45 mm |
Dimensions and Weight
| Machine Dimensions (W x L x H) |
185.1" x 96.9" x 112.6" |
4701 x 2501 x 2859 mm |
| Table Height (Above Floor) |
27.6" |
700 mm |
| Machine Weight |
22046 lbs. |
10000 kg. |
|
| Machine Standard Features |
|---|
|
|
|
- Automatic Adjusting Wire Brush
- Automatically Positioned Guide Arm
- Blade Deviation Monitor
- Blade Speed Controlled By Inverter and Pulse Motor
- Chip Conveyor
- CNC Controls
- Full Stroke Vises
- Hydraulic Blade Tensioning
- Motion Detector
- Programmable Operation By CNC
- Piece Counter
- Wheel Cover Limit Switch
|
- Hydraulic Powered Roller Table
- Non-Powered Roller Table
- Return Conveyor
|
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
© 2010 Amada Machine Tools America, Inc. All rights reserved.
Floor Plan (PDF file)