| Pulse Cutting |
|---|
-
Single pulse cutting cancels the vibrations that occur during the penetration force. This technology
decreases cutting resistance while increasing blade life and cutting rates. Increased blade life is now
guaranteed without sacrificing productivity.
|
|
Capacity
| Cutting Capacity |
Round (Diameter) |
1.18" - 20.87" |
30 - 530 mm |
| Rectangle (W x H) |
20.87" x 20.87" |
530 x 530 mm |
| Work Load Capacity |
10,141 lbs. |
4,600 kg. |
Blade and Vise Operation
| Saw Blade |
Dimensions (L x T x W) |
22'11" x 0.063" x 2-5/8" |
7000 x 1.6 x 67 mm |
| Blade Speed |
49-394 ft./min, Inverter |
15-120 m/min, Inverter |
| Tension Control |
Hydraulic |
| Blade Control |
Top Limit Setting |
Automatic Setting with Quick Approach Feeler |
| Cutting Control |
530AX: Windows CNC, Servo Motor with Ball Screw
530X: Windows CNC, Hydraulic Pressure-Flow Control Valve |
| Vise Operation |
Type |
Split Vise |
| Control |
Hydraulic Full-Stroke Cylinder |
Motors
| Motors |
Saw Blade Motor |
20 HP |
15 kW |
| Hydraulic Pump Motor |
3 HP |
2.2 kW |
| Pulse Cutting Motor |
1/8 HP |
0.09 kW |
| Cutting Fluid Pump Motor |
1/2 HP |
0.25 kW |
| Saw Head Motor |
3/4 HP |
0.5 kW |
Power Requirements
| Power Requirements |
Power Supply Voltage |
AC220±10%, 3 PH, 60 Hz
(All Other Voltages Require Transformer)
|
| Power Requirement |
34 kVA |
Cutting Fluid and Hydraulic
| Cutting Fluid |
Tank Capacity |
50.2 gal. |
190 Liters |
| Pump Type |
Electric |
| Hydraulic |
Tank Capacity |
7.34 gal. |
28 Liters |
| Pressure Setting |
753.8 psi |
5.3 MPa (53 kgf/cm) |
Chip Disposal
| Chip Disposal |
Built-In Wide Scraper Style Chip Conveyor |
Material Index
| Material Index |
Index Mechanism |
Shuttle Vise |
| Stroke |
19.685" |
500 mm |
| Length |
0.394" - 99.999" |
10 - 9999.9 mm |
| Number of Input Station |
1-99 |
| Number of Cut Off Pieces |
1-9999 |
| Remnant Length |
3.94" |
100 mm |
Dimensions and Weight
| Machine Dimensions (W x L x H) |
Head Up Position |
127.6" x 83.2" x 102.4" |
3240 x 2113 x 2600 mm |
| Head Down Position |
127.6" x 83.2" x 102.4" |
3240 x 2113 x 2600 mm |
| Table Height (Above Floor) |
31.5" |
800 mm |
| Machine Weight |
12,125 lbs. |
5500 kg. |
|
| Machine Standard Features |
|---|
|
|
|
- 3D Automatic Adjusting Wire Brush
- Blade Deviation Monitor
- Blade Speed Controlled by Inverter
- Cutting Feed Controlled by Servo Motor(530AX)
- Cutting Feed Controlled by Hydraulic Pressure-Flow Control Valve(530X)
- Cutting Fluid Level Detector
- Motion Detector
- Large Area Chip Conveyor
- Windows Based CNC Controls
- Work End Detect Detector
|
- External Chip Conveyor
- Multiple Vise
- Roller Table 6.8 ft
- Return Conveyor
- SmartCut Band Blade Compatible (Factory Option)
- Vise Pressure Control
|
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
© 2010 Amada Machine Tools America, Inc. All rights reserved.
Floor Plan (PDF file)