| Pulse Cutting |
|---|
-
Single pulse cutting cancels the vibrations that occur during the penetration force. This technology
decreases cutting resistance while increasing blade life and cutting rates. Increased blade life is now
guaranteed without sacrificing productivity.
|
|
|
Capacity
| Cutting Capacity |
Round (Diameter) |
1.18 13 |
30 - 330 mm |
| Rectangle (W x H) |
13" x 13 |
330 x 330 mm |
| Work Load Capacity |
4410 lbs. |
2000 kg. |
Blade and Vise Operation
| Saw Blade |
Dimensions (L x T x W) |
136 x 0.035 x 1-1/2 |
4115 x 0.9 x 41 mm |
| Blade Speed |
49-394 ft./min, Inverter |
15-120 m/min, Inverter |
| Tension Control |
Hydraulic |
| Blade Control |
Top Limit Setting |
Automatic Setting with Quick Approach Feeler |
| Cutting Control |
Hydraulic Pressure Control & Flow-Control Valves |
| Vise Operation |
Type |
Split Vise |
| Control |
Hydraulic Full-Stroke Cylinder |
Motors
| Motors |
Saw Blade Motor |
5 HP (3.7 kW) |
| Hydraulic Pump Motor |
2 HP (1.5 kW) |
| Pulse Cutting Motor |
0.27 HP (0.2 kW) |
| Cutting Fluid Pump Motor |
0.24 HP (0.18 kW) |
Power Requirements
| Power Requirements |
Power Supply Voltage |
AC220±10%, 3 PH, 60 Hz
(All Other Voltages Require Transformer)
|
| Power Requirement |
13 kVA |
Cutting Fluid and Hydraulic
| Cutting Fluid |
Tank Capacity |
16.9 gal. |
64 Liters |
| Pump Type |
Electric |
| Hydraulic |
Tank Capacity |
8.7 gal. |
33 Liters |
| Pressure Setting |
498 psi |
3.5 MPa(35 kgf/cmē) |
Chip Disposal
| Chip Disposal |
Chip Conveyor |
Material Index
| Material Index |
Index Mechanism |
Shuttle Vise |
| Stroke |
19.685 |
500 mm |
| Length |
0.394"-999.999 |
10 - 9999.9 mm |
| Number of Input Station |
1-99 |
| Number of Cut Off Pieces |
1-9999 |
| Remnant Length |
2.283 |
58 mm |
Dimensions and Weight
| Machine Dimensions (W x L x H) |
Head Up Position |
85.6 x 99.6 x 74.4 |
2175 x 2530 x 1891 mm |
| Head Down Position |
85.6 x 99.6 x 74.4 |
2175 x 2530 x 1891 mm |
| Table Height (Above Floor) |
27.6" |
700 mm |
| Machine Weight |
3970 lbs. |
1800 kg. |
|
| Machine Standard Features |
|---|
|
|
|
- 99 Station NC Backgauge
- AC Inverter Speed Change
- Auto Initial Material Position
- Auto Trim Cut
- Blade Deviation Monitor
- Chip Conveyor
- Full Stroke Vise
- Hydraulic Blade Tension
- Motion Detector
- Quick Approach
- Split Front Vise
|
- Roller Table 6.5 ft
- Roller Table 10 ft
- Vise Pressure Control
|
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
© 2008 Amada Cutting Technologies, Inc. All rights reserved.
