Amada Horizontal Metal Cutting Miter Band Saw Bandsaw HK400


	HK400

	Amada Horizontal Semi-Automatic Metal Cutting Miter Band Saw
		Click to Enlarge

Productivity Features

Saw Head Frame
The rigid 'C' section frame carries the mountings for the two band wheels, heavy duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.


Band Wheels & Drive System
The inverter controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set on using the band speed adjustment knob on the control panel.


Canted Head and Single Column Mounting
The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single column mounting enables the saw guides to be much closer together compared to scissor type machines which improves the cutting performance.


Full Stroke Clamping Vise
The full stroke clamping vise reduces the operator's setup time for different widths of material.


Manual Vise Inching Control
The vise inching control enables the operator to more accurately locate the work piece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.


Guarding
The saw band is constrained within the heavy gage guarding in all non-cutting areas.

Specifications

Capacity
Cutting Capacity	Round (Diameter)	12.6" (at 90°)	320 mm (at 90°)
		8.9" (at 45°)	220 mm (at 45°)
		3.9" (at 60°)	100 mm (at 45°)
	Rectangle (W x H)	16" x 11" (at 90°)	400 x 280 mm (at 90°)
		8.9" x 11" (at 45°)	220 x 280 mm (at 45°)
		3.9" x 11" (at 60°)	100 x 280 mm (at 60°)
Work Load Capacity		880 lbs.	400 kg.

Blade and Vise Operation
Saw Blade	Dimensions (L x T x W)	12'9" x 0.042" x 1-1/4	3885 x 1.066 x 32 mm
	Blade Speed	100-325 ft./min, Inverter	30-100 m/min, Inverter
	Tension Control	Manual - Split Clutch
Blade Control	Top Limit Setting	Manual Setting Dial
Blade Control	Cutting Control	Oil Pressure Flow Control Valve
Vise Operation	Type	Single Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder

Motors
Motors	Saw Blade Motor	3 HP	2.2 kW
	Hydraulic Pump Motor	1 HP	0.75 kW
	Cutting Fluid Pump Motor	1/10 HP	0.06 kW

Power Requirements
Power Requirements	Power Supply Voltage	AC220V±10%, 3 PH, 60 Hz All other Voltages Require Transformer.
Power Requirements	Power Requirement	5.5 kVA

Cutting Fluid and Hydraulic
Cutting Fluid	Tank Capacity	10.7 gal.	40 Liters
Cutting Fluid	Pump Type	Electric
Hydraulic	Tank Capacity	10.7 gal.	40 Liters
Hydraulic	Pressure Setting	391 psi	2.7 MPa(27 kgf/cm)

Chip Disposal
Chip Disposal	Manual

Material Index
Material Index	Index Mechanism	N/A
	Stroke	N/A
	Length	N/A
	Number of Input Station	N/A
	Number of Cut Off Pieces	N/A
	Remnant Length	N/A

Dimensions and Weight
Machine Dimensions (W x L x H)	Head Up Position	77.6" x 56.3" x 73.4"	1970 x 1430 x 1865 mm
Machine Dimensions (W x L x H)	Head Down Position	77.6" x 56.3" x 64.0"	1970 x 1430 x 1625 mm
Table Height (Above Floor)		30.3"	770 mm
Machine Weight		1990 lbs.	900 kg.

Video

Machine Standard Features

8 Degrees Saw Head Cant
60 Degree Miter Capability
Direct Drive
Full Stroke Vise
Inverter Blade Speed Control
Light Beam Marking
Post Construction Type Saw Head

Optional Accessories

Roller Table 6.5 ft
Roller Table 10 ft

Specifications may change without notice at the sole discretion of Amada's Engineering Department.