Home Machines Blades Parts Support PDF Catalog Videos About Us
HFA700CII
Amada Horizontal Full Automatic Metal Cutting Band Saw
amda horizontal metal cutting band saw bandsaw HFA700CII
Click to Enlarge
Productivity Features
High Accuracy for large sized materials
  • This compact machine supports up to 32" x 28"
    High accuracy cutting, and durability
Band Deviation Monitor
  • The NC controller constantly monitors the cutting and blade conditions, including the twist of the saw blade. When these exceed the preset parameters in the automatic blade run-out detector the machine will cease cutting and indicate the reason for stopping.
Auto Trim Positioning
User-Friendly Operator Console
  • By simplifying required input data, the cutting rate controller (CNC Light) makes achieving maximum cutting rates, accuracies, and longer blade life a constant.
Specifications
Capacity
Cutting Capacity Round (Diameter) 11.4" - 28" 290 - 700 mm
Rectangle (W x H) 32" x 28" 800 x 700 mm
Work Load Capacity 17640 lbs. 8000 kg.

Blade and Vise Operation
Saw Blade Dimensions (L x T x W) 27'3 x 0.063" x 2-5/8" 8300 x 1.3 x 65 mm
Blade Speed 50- 394 ft./min, Inverter 15-120 m/min, Inverter
Tension Control Hydraulic
Blade Control Top Limit Setting Automatic Setting with Quick Approach Feeler
Cutting Control CNC-Light
Vise Operation Type Front and Rear Vise
Control Hydraulic Full-Stroke Cylinder

Motors
Motors Saw Blade Motor 15 HP 11 kW
Hydraulic Pump Motor 5 HP 3.7 kW
Cutting Fluid Pump Motor 1/2 HP 0.36 kW

Power Requirements
Power Requirements Power Supply Voltage

AC220±10%, 3 PH, 60 Hz
(All other voltages require transformer.)

Power Requirement 26 kVA

Cutting Fluid and Hydraulic
Cutting Fluid Tank Capacity 26.4 gal. 100 Liters
Pump Type Electric
Hydraulic Tank Capacity 30.4 gal. 115 Liters
Pressure Setting 784 psi 5.5 MPa(55 kgf/cm²)

Chip Disposal
Chip Disposal Chip Conveyor

Material Index
Material Index Index Mechanism Shuttle Vise
Stroke 19.6" 500 mm
Length 0.39" - 999.999" 10 - 9999.9 mm"
Number of Input Station 1-99
Number of Cut Off Pieces 1-9999
Remnant Length (For Clamp Clearance of 0.79" /20 mm) 1.38" 35 mm

Dimensions and Weight
Machine Dimensions (W x L x H) Head Up Position 157.4" x 84.0" x 112.9" 3999 x 2132.5 x 2867 mm
Head Down Position 157.4" x 84.0" x 112.9" 3999 x 2132.5 x 2867 mm
Table Height (Above Floor) 27.6" 700 mm
Machine Weight 15435 lbs. 7000 kg.


Video


Floor Plan
Floor Plan (PDF file)
Machine Standard Features
  • Automatically Positioned Guide Arm
  • Blade Deviation Monitor
  • Blade Speed Controlled By Inverter
  • Chip Conveyor
  • CNC Controlled Down Feed
  • Drive by No Torque Loss Helical Bevel Gear
  • Full Stroke Vises
  • Hydraulic Blade Tensioning
  • Motion Detector
  • Piece Counter
  • Programmable Operation By Micro-Processor
  • Vibration Damping Rollers
  • Wheel Cover Limit Switch
Optional Accessories
  • Beacon
  • Idler Roller Table
  • Vertical Clamp, Must be Factory Ordered
  • Vise Pressure Control Valve

Specifications may change without notice at the sole discretion of Amada's Engineering Department.

 

© 2010 Amada Machine Tools America, Inc. All rights reserved.