Home Machines Blades Parts Support PDF Catalog Videos About Us
H250SAII
Amada Horizontal Semi-Automatic Metal Cutting Band Saw
amda horizontal metal cutting band saw bandsaw H250SAII
Click to Enlarge
Productivity Features
Hydraulic Vise
  • Prevents material movement while sawing
  • Easy set-up
  • Positive clamping on full range of capacity
Graduated Length Stop
  • Combines with fine feed roller for accurate material indexing
  • Quick and easy set-up
Dual Cut Control System
  • Combines with fine feed roller for accurate material indexing
  • Quick and easy set-up
  • Blade feed controlled by both pressure and flow
  • Maximum blade life in all cutting applications
  • Easy set-up with reference cutting rate system
Semi Automatic Indexing
  • Quick and easy indexing with fine feed roller
Specifications
Capacity
Cutting Capacity Round (Diameter) 1.18" - 10" 30 - 250 mm
Rectangle (W x H) 12" x 10" 300 x 250mm
Work Load Capacity 3307 lbs. 1500 kg.

Blade and Vise Operation
Saw Blade Dimensions (L x T x W) 11'6" x 0.035" x 1" 3505 x 0.95 x 25mm
Blade Speed 89, 131, 177, 223, 262 ft./min, 60Hz 27, 40, 54, 68, 80 m/min, 60Hz
Tension Control Manual - Slip Clutch
Blade Control Top Limit Setting Manual Setting Dial
Cutting control Oil Pressure - Flow Control Valve
Vise Operation Type Single Vise
Control Hydraulic (Manual Open/Close Lever)

Motors
Motors Saw Blade Motor 3 HP 2.2 kW
Hydraulic Pump Motor 1 HP 0.75 kW
Cutting Fluid Pump Motor 1/8 HP 0.12 kW

Power Requirements
Power Requirements Power Supply Voltage AC220V±10%, 3 PH, 60 Hz
Power Requirement 4.4 kVA

Cutting Fluid and Hydraulic
Cutting Fluid Tank Capacity 10 gal. 38 Liters
Pump Type Electric
Hydraulic Tank Capacity 5.3 gal. 20 Liters
Pressure Setting 285 psi 2 MPa(20 kgf/cm²)

Chip Disposal
Chip Disposal Manual

Material Index
Material Index Index Mechanism N/A
Stroke N/A
Length N/A
Number of Input Stations N/A
Number of Cut Off Pieces N/A
Remnant Length N/A

Dimensions and Weight
Machine Dimensions (W x L x H) Head Up Position 73.6" x 72.6" x 69.8" 1868 x 1845 x 1772 mm
Head Down Position 73.6" x 72.6" x 52.8" 1868 x 1845 x 1340 mm
Table Height (Above Floor) 27.6" 700 mm
Machine Weight 2,205 lbs. 1000 kg.
Floor Plan
Floor Plan (PDF file)
Machine Standard Features
  • Graduated Length Stop
  • Roller Stand
  • Roller Table (3')

Specifications may change without notice at the sole discretion of Amada's Engineering Department.

 

© 2010 Amada Machine Tools America, Inc. All rights reserved.