Home Machines Blades Parts Support PDF Catalog Videos About Us
H1300II
Amada Horizontal Semi-Automatic Metal Cutting Band Saw
amda horizontal metal cutting band saw bandsaw H1300II
Click to Enlarge
Productivity Features
Hydraulic Vise
  • Prevents material movement while sawing
  • Easy set-up
  • Positive clamping on full range of capacity
Dual Cut Control System
  • Combines with fine feed roller for accurate material indexing
  • Quick and easy set-up
  • Blade feed controlled by both pressure and flow
  • Maximum blade life in all cutting applications
  • Easy set-up with reference cutting rate system
Semi Automatic Indexing
  • Quick and easy indexing with fine feed roller
Specifications
Capacity
Cutting Capacity Round (Diameter) 22.5"- 52" 570 - 1300 mm
Rectangle (W x H) 52" x 52" 1300 x 1300 mm
Work Load Capacity 37,487 lbs. 17,000 kg.

Blade and Vise Operation
Saw Blade Dimensions (L x T x W) 40'4" x 0.063" x 3" 12300 x 1.6 x 80 mm
Blade Speed 50-230 ft./min by Inverter 15-70 m/min by Inverter
Tension Control Hydraulic
Blade Control Top Limit Setting Automatic Setting with Quick Approach Feeler
Cutting control CNC-light
Vise Operation Type Main Vise
Control Hydraulic Full-Stroke Cylinder

Motors
Motors Saw Blade Motor 20 HP 15 kW
Hydraulic Pump Motor 5 HP 3.7 kW
Cutting Fluid Pump Motor 1/4 HP 0.4 kW

Power Requirements
Power Requirements Power Supply Voltage

AC220±10%, 3 PH, 60 Hz
(All other voltages require transformer.)

Power Requirement 35 kVA

Cutting Fluid and Hydraulic
Cutting Fluid Tank Capacity 73.9 gal. 280 Liters
Pump Type Electric
Hydraulic Tank Capacity 52.8 gal. 200 Liters
Pressure Setting 1,080 psi 7.6 MPa (76 kgf/cm)

Chip Disposal
Chip Disposal Chip Conveyor

Material Index
Material Feed Index Mechanism Table Feed, Semi-Automatic
Stroke 70.8" Hydraulic, Manual 1800 mm, Hydraulic, Manual
Length N/A
Number of Input Stations N/A
Number of Cut Off Pieces N/A
Remnant Length N/A

Dimensions and Weight
Machine Dimensions (W x L x H) Head Up Position 220.4" x 169.3" x 160.8" 5597 x 4300 x 4084 mm
Head Down Position 220.4" x 169.3" x 136.9" 5597 x 4300 x 3479 mm
Table Height (Above Floor) 28" 710 mm
Machine Weight 35,200 lbs. 16,000 kg.
Machine Standard Features
  • Blade Deviation Monitor
  • Blade Speed Controlled by Inverter
  • CNC Control Down Feed
  • Full Stroke Vise
  • Light Beam Marking
  • Motion Detector
  • Remote Blade Guide Control
  • Wheel Cover Limit Switch
Optional Accessories
  • Beacon
  • Rear Vise

Specifications may change without notice at the sole discretion of Amada's Engineering Department.

 

© 2010 Amada Machine Tools America, Inc. All rights reserved.